Product Introduction
Kitchen Pod 01 places our established outdoor-kitchen cabinet and appliance system inside a new pod shell. The internal cabinet can be modular or one-piece. A lift canopy, side screens, rear panel and base form the exterior; the pod opens into a complete cooking space and closes back into a compact horizontal profile.
Kitchen Pod 01 uses the same cabinet construction and appliance options as our outdoor kitchen range, packaged within a new exterior shell. The lift canopy, side screens, rear panel and base cabinet define the product. Raising the canopy opens the cooking zone; closing it returns the pod to a compact, continuous profile.
Choose modular or one-piece cabinetry inside. Modular cabinetry suits a kitchen that may grow or change; one-piece cabinetry suits a fixed layout with a continuous internal face. Both use the same fully welded aluminum cabinet body, appliance bays, worktop options and function modules. The pod shell remains unchanged.

|
Product element |
Configuration |
|
Exterior shell |
Lift canopy, side screens, rear panel, base and continuous worktop |
|
Interior cabinetry |
Modular cabinetry / One-piece cabinetry |
|
Cabinet construction |
Fully welded aluminum |
|
Appliance options |
Gas grill, ceramic kamado, pizza oven and outdoor refrigerator |
|
Supporting modules |
Sink, preparation and storage, bar counter and corner |
|
Suitable settings |
Garden, patio and residential terrace |
Choose the Interior Cabinet System
The key decision is inside the pod. Both cabinet systems use the same appliance options, worktops, function modules and fully welded aluminum cabinet construction. The difference is whether the kitchen is assembled from independent cabinets or organised as one continuous cabinet body. The exterior shell does not change.
|
Comparison |
Modular cabinetry |
One-piece cabinetry |
|
Assembly |
Every function is a complete cabinet with its own frame, worktop, adjustable feet and appliance bay |
The same functions are organised in one continuous cabinet body with aligned doors, drawers, worktop and plinth |
|
Best suited to |
Layouts that may grow, change or be completed in stages |
A fixed appliance mix and internal layout planned as one complete kitchen |
|
Flexibility |
Modules connect with internal plates and can be added, removed or reordered |
The full internal arrangement is set as one integrated layout |
|
Visual emphasis |
Clear module logic with aligned worktop, door line and plinth |
A more continuous door face with fewer visible joints |
|
Service logic |
Each appliance cabinet is independent and clearly defined |
Appliance, preparation and storage zones are organised within one layout |
Modular Cabinetry
Modular cabinetry is assembled from independent function cabinets. Gas grill, ceramic kamado, pizza oven, outdoor refrigerator, sink, preparation and storage, and bar counter each have their own cabinet, appliance bay and worktop. They can be combined around the patio width and cooking routine.
Each module has its own adjustable feet, while worktop height and plinth line remain aligned. Internal connector plates join adjacent cabinets into one working run and allow the layout to be extended or reordered later.

Start with the functions you need
A basic layout can begin with a gas grill and preparation storage, then add a sink, ceramic kamado, pizza oven or outdoor refrigerator as the space and routine require. Module order can follow preparation, cooking, serving and storage.
Keep a continuous appearance
The cabinets remain separate units, but share the same worktop height and plinth line. Doors, drawers and appliance bays align along one horizontal working band across the full run.
One-Piece Cabinetry
One-piece cabinetry is not a second shell. It is a different way of building the interior within the same pod. Cabinets, worktop, appliance bays and storage are arranged as one continuous internal body, with door, drawer and worktop lines set across the complete kitchen.
This option suits a project with a confirmed appliance mix and working sequence. Grilling, pizza baking, washing, chilled storage and preparation each have a fixed place, creating a continuous internal face with fewer visible cabinet joints.

A complete fixed layout
Appliances, washing and storage are set in their final sequence. The continuous cabinet body gives the interior a unified face and a clear working line from preparation to serving.
The same function standards
One-piece cabinetry uses the same gas grill, ceramic kamado, pizza oven, outdoor refrigerator, sink and preparation storage options as modular cabinetry. It also uses the same fully welded aluminum construction, worktops and finishes.
Optional Modules and Appliances
Appliance options follow our outdoor kitchen range. Standard module widths are listed below, with the final combination arranged around the pod length and cooking routine. Modular and one-piece cabinetry use the same appliance set.
|
Module |
Standard widths |
Main configuration |
|
Gas grill |
800 / 900 / 1,200 mm |
3, 4 or 5 burner stainless steel grill; LP or natural gas |
|
Ceramic kamado |
700 / 800 mm |
Fits 18, 21 or 24 in kamado; insulated bay and rear ventilation |
|
Pizza oven |
900 / 1,000 mm |
Gas or wood-fired; internal oven up to 600 mm |
|
Outdoor refrigerator |
600 / 800 mm |
110 or 140 L glass-door refrigerator; lock and interior light |
|
Sink |
800 / 900 / 1,000 mm |
304 stainless single or double bowl; 40 mm drain; flush cutting board |
|
Preparation and storage |
600 / 800 / 900 mm |
Two or three soft-close drawers; cutting board and cutlery options |
|
Bar counter |
900 / 1,200 mm |
300 mm worktop overhang; stool seating; open or bottle storage |
|
Corner |
900 x 900 mm |
90-degree corner with carousel, shelf or pull-out storage |
Aluminum Shell and Cabinet Construction
The outer shell uses a 3.0 mm aluminum profile and 2.5 mm aluminum plate with a PVDF coating. A 4000K LED strip runs beneath the canopy, while a dual-support structure steadies the opening shell and side screens.
The internal cabinet body is fully welded in aluminum. The frame uses 6063-T5 aluminum profile, and the door uses a 10 mm aluminum honeycomb panel to stay flat while keeping weight controlled. Hinges, screws and connectors are 304 stainless, with continuous EPDM sealing.

|
Element |
Material and specification |
|
Shell frame |
3.0 mm aluminum profile |
|
Shell exterior |
2.5 mm aluminum plate with PVDF coating |
|
Cabinet frame |
6063-T5 aluminum profile, 2.0 mm wall |
|
Side, base and rear panels |
Welded aluminum plate, 1.0 mm average; 1.2 mm at hinges and edges |
|
Doors |
10 mm aluminum honeycomb panel |
|
Hardware |
304 stainless hinges, screws and connector plates |
|
Sealing |
Continuous EPDM gasket |
|
Adjustable feet |
20 mm levelling range |
Worktops Finishes and Services
Worktop materials
Choose powder-coated aluminum, anodized aluminum, quartz stone, sintered stone or 304 stainless. Aluminum keeps the kitchen light and visually unified; quartz and sintered stone bring a stone surface to the garden; 304 stainless suits frequent use and hospitality settings.
|
Worktop |
Character |
Best for |
|
Powder-coated aluminum |
Lightweight, uniform color and easy to clean |
All-aluminum appearance and frequent garden use |
|
Anodized aluminum |
Metallic surface with good wear resistance |
Modern, high-use kitchens |
|
Quartz stone |
Stable surface with a broad choice of finishes |
Residential gardens and unified layouts |
|
Sintered stone |
Heat and wear resistant in a thinner panel |
Large continuous stone surfaces |
|
304 stainless |
Durable, heat resistant and easy to clean |
Hospitality and high-frequency cooking |
Colors and finishes
Cabinetry and shell colors can be specified in RAL colors or finished with electrostatic powder coating, 3D wood-grain transfer or an anti-fingerprint micro-molecule surface. Charcoal, light grey, sand, olive, deep blue and wood grain create different garden relationships while keeping door lines and worktops aligned.
Service connections
The sink module connects to a 1/2 in cold-water supply at 2 to 6 bar and uses a 40 mm drain. Appliance bays provide a 220-240 V 50 Hz or 110 V 60 Hz, 16 A supply with an IP44 socket. The gas grill connects to 1/2 in LP or natural gas with an accessible isolation valve.
Garden Setting and FAQs

Kitchen Pod 01 suits a garden terrace, patio or residential outdoor room. The interior can grow with modular cabinetry or be completed as one-piece cabinetry. The canopy and side screens frame the cooking zone, while the rear panel and integrated lighting carry the space into the evening.
Q: How is Kitchen Pod 01 different from the existing outdoor kitchens?
A: The cabinet and appliance system inside is shared with our outdoor kitchen range. The main difference is the exterior shell: Kitchen Pod 01 forms a separate canopy pod with side screens, a rear panel and base cabinet, while the existing outdoor kitchens use their own open or closing shells.
Q: Should I choose modular or one-piece cabinetry?
A: Choose modular cabinetry when functions may be added or reordered. Choose one-piece cabinetry when the appliance mix and storage layout are already fixed and a continuous internal face is preferred. The appliances, worktops and cabinet construction standards remain the same.
Q: Which appliances can be combined?
A: Available options include a gas grill, ceramic kamado, pizza oven, outdoor refrigerator, sink, preparation storage, bar counter and corner module. The final combination follows the pod length and cooking workflow.
Hot Tags: lift-canopy outdoor kitchen pod, China lift-canopy outdoor kitchen pod manufacturers, suppliers, factory, modular bbq kitchen cabinets, outdoor kitchen cabinetry, outdoor kitchen counter, outdoor kitchen trash cabinet, stainless steel outdoor kitchen cabinets, weather resistant outdoor kitchen cabinets

